Jump to content

Computers/Beelink EQi12: Difference between revisions

From SNAFU Con Wiki
Created page with "We own a Beelink EQi12 mini PC which we use as the at-con registration server. It was purchased from Amazon on 18 October 2025 for $378. thumb thumb thumb {| class="wikitable" |+ !Manufacturer |Beelink |- !Model |EQi12 |- !Manufactured |??? |- !RAM |32 GB (2x 16) DDR4-3200 SODIMM |- !CPU | Intel [https://www.intel.com/content/www/us/en/products/sku/226261/intel-core-i5..."
 
add CMOS reset info
 
(One intermediate revision by the same user not shown)
Line 62: Line 62:
|1.15 lbs
|1.15 lbs
|}
|}
=== Firmware ===
Hammer the Delete key while powering up to access the firmware setup.
There doesn't seem to be a CMOS reset jumper anywhere, so if you need to reset the firmware settings you have to pull the CMOS battery for 30 seconds or so. Unfortunately the battery is on the back side of the mainboard under the fan, so you have to take out basically every part in the entire machine to get to it (though fortunately not the heatsink itself, so you don't have to re-paste the CPU).

Latest revision as of 02:03, 26 March 2026

We own a Beelink EQi12 mini PC which we use as the at-con registration server.

It was purchased from Amazon on 18 October 2025 for $378.

Manufacturer Beelink
Model EQi12
Manufactured ???
RAM 32 GB (2x 16) DDR4-3200 SODIMM
CPU

Intel Core i5-1235U
2x P-cores 4.4 GHz max
8x E-cores 3.3 GHz max

Graphics Intel Iris Xe (integrated) 1.2 GHz
Storage

2x M.2 2280 PCIe 4.0 x4 slots:
1x 500 GB NVMe PCIe 4.0x4
1x unpopulated

Optical None
Ports

2x HDMI (up to 4K 60Hz)
1x USB 3.2 type C 10 Gbps
3x USB 3.2 type A 10 Gbps
1x USB 2.0 type A
2x Ethernet 10/100/1000 (RTL8111H)
3.5mm TRRS Headphone + Microphone

Wireless

WiFi 6 (Intel AX200)
Bluetooth 5.2

Display External
Size 4.96 x 4.96 x 1.74 in
Weight 1.15 lbs

Firmware

Hammer the Delete key while powering up to access the firmware setup.

There doesn't seem to be a CMOS reset jumper anywhere, so if you need to reset the firmware settings you have to pull the CMOS battery for 30 seconds or so. Unfortunately the battery is on the back side of the mainboard under the fan, so you have to take out basically every part in the entire machine to get to it (though fortunately not the heatsink itself, so you don't have to re-paste the CPU).