Mixers
Jump to navigation
Jump to search
These are the convention mixers.
Behringer SL2442FX-PRO
This mixer is owned by an attendee who loans us the mixer each year in exchange for some comped badges.
Features
- 16 mic/mono channels
- 2 full stereo channels
- 2 simple stereo channels with fader and aux sends only
- each full channel:
- 4-band EQ
- 4 aux sends (2 post fader, 2 pre/post switchable)
- mute switch
- main out on XLR and quarter
- 4 sub-groups assigned in stereo pairs, out on quarter only
- mono out with sweepable low-pass filter, out on quarter only
- RCA tape IO
- solo in place & pre-fader listen
Links
Images
Mackie PROFX12
This mixer lives in the wooden rolling case alongside the wireless mic kits, primarily used for Fully Unscripted and larger Panel Main events.
Purchased from Amazon in 2013, original cost $279.99.
Features
- 4 mic/mono channels
- 2 mic/stereo channels
- 2 stereo channels
- each channel:
- 3-band EQ
- 2 aux sends
- mute switch
- main out on XLR and quarter
- RCA/USB tape IO
Links
Images
Behringer UB1202
This mixer lives in the 6-mic travel bag and was presumably purchased at the same time.
Features
- 4 mono mic/line channels w/ 3-band EQ
- 4 stereo line channels
- FX bus w/ post-fader sends on all channels
- RCA tape IO
- Main out on quarter only
Links
Images
Mackie 402-VLZ3
Purchased three from B&H Photo in 2010, original cost $99.99 each.
Features
- 2 mic/mono channels with 2-band EQ
- 1 stereo channel
- RCA tape IO
- main out on quarter only
Links
Images
Behringer X Air XR12
Purchased second hand in 2019 for $600
Features
- 4 combination XLR/1/4" inputs
- 8 1/4" inputs
- 2 XLR outputs
- 2 1/4" AUX outputs
- USB connectivity for recording
- Ethernet and Wifi connectivity for control
- Requires a computer or tablet running X32 Edit for control
Links
Images
Gear One PA2400
This is a powered mixer used to power the speakers in Panel Main
Features
- Two 400W power amps
- Assignable power output (monitors and/or mains)
- Eight inputs
- Built-in 24-bit FX
- Dual 7-band Equalizers
- Monitor send per channel
Links
Images
Phonic Powerpod 620 Plus
Powered mixers used to power the speakers in Panel 2 and Video
Features
- 100W + 100W @ 4 ohms stereo power amplifier for Main L/R or Main/Monitor (Bridge mono, 200W @ 8 ohms)
- 32 - 40-bit digital multi-effect processor with 16 programs plus footswitch jack
- 6 balanced Mic inputs and 8 Line inputs
- Two Super Hi-Z inputs optimized for direct instrument input
- 2-band channel EQ
- 7-band graphic EQ
- Pad control on channels 14
- Aux input
- Stereo RCA I/O
- +48V phantom power
- Built-in limiters
- Monitor and effect sends on each input channel
- Drive level/Effect out master control to the input of built-in effect processor